For laboratories or small - scale production lines that need to complete sintering experiments frequently and in short cycles, the Phoenix - 9C is an ideal device that combines performance and practicality. It abandons the inherent defects of the traditional series - connection of silicon - carbide rods. Through voltage - regulation technology, it balances the heating load, enabling the equipment to maintain stable performance even under high - intensity use, especially suitable for scenarios with multiple sintering operations per day.

Basic Product Information

The core parameters of the Phoenix - 9C sintering furnace are as follows: the maximum temperature is 1530 °C, the heating rate can reach 200 °C/minute, and it only takes 20 minutes to heat from room temperature to high temperature. With a maximum holding function of 2 hours and 46 minutes, it can cover various processes from rapid crystallization to slow densification. Its electrical design is compatible with 100 - 120V and 230V voltages, and the power is controlled within 1300W, eliminating the need for dedicated high - voltage lines and facilitating installation.

Scenario - based Advantages

Laboratory - friendly: With a size of 27×36×56cm and a weight of 20Kg, it can be directly placed on the laboratory bench. The furnace core diameter of 6.5cm is suitable for most standard sample sizes.

Production Adaptability: The entire crystallization cycle of 40 minutes - 1 hour supports multiple batches of production per day, and the sintering yield rate within 45 minutes is stably above 98%.

Easy Maintenance: The reduced wear and tear of silicon - carbide rods due to voltage - regulation technology extends the replacement cycle and reduces maintenance costs.

Technical Parameters and Selection Table

Technical Parameter

Details

Temperature Control

Up to 1530 °C, holding for up to 2h46min

Electrical Specifications

100 - 120V/230V, 1300W

Physical Specifications

27×36×56cm (main body), 20Kg net weight

27×36×56cm (main body), 20Kg net weight

40 minutes - 1 hour

Tags:

Dental Sintering Furnace

zirconia sintering furnace

Sintering Cycle Precision Ceramic Kiln

Phoenix-10S Dental Sintering Furnace Chairside Efficiency Redefined

Get Best Price

Video

AC 220V Dental Sintering Furnace Vacuum Pump Included Temperature Range 1000°C 1600°C for Your Requirements

Get Best Price

Video

110-240V Dental Sintering Furnace Precise and Consistent Sintering for Perfect Results

Get Best Price

Video

State-of-the-Art Dental Sintering Furnace 1000°C 1600°C Temperature Range for Perfect Sintering

Get Best Price

Automatic Bench-Top Sintering Oven 20-Minute 1530°C Heating Plug-and-Play Setup

Get Best Price

Technical Parameter	Details
Temperature Control	Up to 1530 °C, holding for up to 2h46min
Electrical Specifications	100 - 120V/230V, 1300W
Physical Specifications	27×36×56cm (main body), 20Kg net weight
27×36×56cm (main body), 20Kg net weight	40 minutes - 1 hour